Video Motion Detector

This device uses a PIC16F819 and an LM339 to detect motion on a video signal. The incoming video is 'clamped' using one section of the LM339, the sync tips are detected with another section, and a 3rd section can detect VBI or other data.

The analog video is fed directly into the PIC at RA0. The low-resolution video is sampled from an 8 by 8 array on the screen. This was just an experiment, but seemed to actually work very well. Unforturnately, the source file has been lost. For information on how to read video samples and evaluate them see the Video Switcher project.